Skip to main content

Test Collection Instructions

Do NOT wash your genitals thoroughly before urinating. Do NOT urinate for at least 2 hours prior to use. It is preferable to collect your first urine in the morning and return the sample the same day (Monday to Friday only). The materials in this testing kit are for single use only. Preservative (E) should remain inside the collector tube.

DirectionsA diagram of a test tube

  1.  Unscrew the tube cap (C).
  2. Screw the collection tube (D) on the funnel (A).
  3. Urinate into the funnel, which will automatically collect the correct volume of urine into the collection tube. There is no need to interrupt the urine stream. Excess urine that no longer fits into the collection tube will flow into the toilet via the other end of the funnel.
  4. Disconnect the collection tube from the funnel.
  5. Close the tube tightly with tube cap (C). Write your name and date of birth on the collection tube label and place it on the tube.
  6. Dispose of the funnel device and put the collection tube containing urine in the resealable area of the biohazard bag (with the absorbent pad). Include your completed documents in the back of the biohazard bag.
  7. Return the sample to the drop box located in the Campus School building which is open from 8-5. This building is located on the corner of S Brady St and W University Dr and has free temporary parking in the back. This building can be accessed with a BSU I.D. card after hours on the NW side of the building on S Brady St.
Back To Top