Printer Information
There are ‘Bronco Print’ devices located in the 1st floor lobby and 2nd floor atrium of the ERB that print in black & white or color by print release. Follow this link to the BroncoPrint Papercut print client installer. Color Printers are on the 1st and 4th Floor.
If you are looking to print a poster on our plotter, then please follow this guide. The plotter is located in ERB 3110. There is also a plotter located in the library that a librarian can help with.
In addition to ‘Bronco Print’ devices, there are specific ‘Department Print’ MPS devices located in the ‘mailrooms’ on each floor of ERB, which are themselves located in the approximate center of the office (north) side of the building. These are combination printer, scanner, copier machines for ERB faculty, staff, and graduate student use, and each has a similar naming convention shown in the table below.
Like Bronco Print, these MPS printers use the same PaperCut print client for authentication. To install the PaperCut print client, you must be logged into the Boise State University domain, e.g. on a wired connection or on the ‘eduroam’ wireless network if on-campus (or logged into Boise State University using GlobalProtect VPN if off-campus). OIT Help Desk or the GEOS admin staff can provide a download link to a PaperCut print client installer for both Bronco Print and the MPS printers.
Contact the Help Desk if you are having issues connecting to the printers.
For help with stapling, check out this guide.
Floor | Room # | Printer Name |
---|---|---|
1 | 1150 | MPS_ERB-1150 (color) |
2 | 2142 | MPS-ERB-FL2-2142 |
3 | 3140 | MPS-ERB-3140 |
4 | 4142 | MPS-ERB-4142 (color) |
5 | 5144 | MPS-ERB-5144 |